Tang – Perth – I use these people a lot
Dan Tech – Perth – I use these people sometimes
Navada – Perth (didn’t believe me when they sold me a faulty mobo in 1999)
Zeus Technology – Perth
Cydex – Sydney
Sigmacom – NSW
City Software – Victoria
YAHOO Listing: Computer Retails in Australia
Nov 2001: I have removed those that no longer exist.
Pastel is an accounting package for the Win32 platform. Version 5 was originally written for either Windows 3.1 or WIndows 95: it seems to be a 16-bit application. Running this on Windows 2000 should be straight forward, if you are prepared to give users access to the Power Users user group on the workstation.
Lets add a little spice to this problem. I’m going to use Samba 2.2.2 (or newer, perhaps) as a Primary Domain Controller for authenticating the users ont he network and giving them access to the shared files. Pastel does multi-user by file sharing: samba is a damn fine file server for SMB protocols, and can be a PDC as well.
However, as at Samba 2.2.2, there are only two groups that Domain Users may be in: Administrators, and Users. Not Power Users.
So the task was this: get Pastel to run for standard Users.
The problem with this is file and registry key permissions: these are undocumented, and Pastel are either unwilling to tell me what these should be, or don’t know; its hard to tell with their confusion. I am hoping someone at Pastel will see this page, and correct any mistakes here: God know that phoning and emailing them has failed to extract the right information!
Pastel uses Btrieve microkernel as a back-end. So we must make this accessible as well. There are two parts to check: Registry keys and system DLLs.
In watching the %WINDOWS%/system directory during the install, I found that Btrieve installed the following files:
These files should be readable and executable where required for all users on the domain.
The registry keys are in HKLM/Software/Btrieve Technologies. This should have full access to everyone on the domain.
Next, Pastel permissions. Find the Pastel directory (possibly Pas5) and change that to be accessible to all users on the domain. Make the executables to be executable for all users on the domain.
This page is for that tidbit of information you need to get firewire happening on your PC if you are using an Adaptec 8945HC or similar Adaptec card. If you are pulling your hair out, then hopefully you got here from a search engine and this may just be what you need.
Why? Well I’ve spent three months trying to get this to work. The system, which was purchased new with this card, and assumed to be operational then, didn’t work when I came to actually plug a 1394 camera in to it. Much screaming at the vendor!
Over the three months that followed from me finding that it didnt work until today, the card has been replaced once, and the system has spent a few weeks with the vendor trying to get it to work. They finally gave up and offered to refund my money. They claimed to have had no help from Adaptec in getting it working, and I believe them.
However, as a last reort, I took yet another look around the Adaptec web site and saw a small note saying effectively not to use the microsoft driver. Yep, this fixed it for me.
The Microsoft driver is the the system comes up with as the recommended one, however when I forced it to use the adaptec driver, which was older, everything started to work.
So, if you’ve been having problems with firewire on a PC using an Adaptec card, check your driver. Right Click, choose properties, and then device manager. Select your 1934 device, and click Properties. See who the manufacturer is of the driver, and make the decision. You mileage may vary.
Good luck in getting firewire happening on your system!